For jobsites
Construction Dumpster Rental Queens, NY
Roll-off containers sized by build phase, planned around narrow Queens streets and tight building access before the first container ever gets delivered.
- Licensed & insured
- Same-day delivery
- Flat-rate pricing
- Locally owned
Construction Dumpster Rental Queens, NY across Long Island City and Queens
Long Island City's own story is a genuine one of industrial land clearing out and rebuilding itself — the neighborhood ran for decades as a factory and rail-yard district, and today it's a mix of new residential towers, gut-renovated older loft buildings, and small manufacturing holdouts still operating a block apart from a construction crane. Our jobsite accounts feel that mix directly: ground-up new construction and heavy renovation debris, often on the same street.
We size construction accounts by phase rather than guessing at one container for the whole job, whether that job is new residential building in Astoria or Sunnyside or a gut renovation closer to Long Island City itself. Framing and rough-in generate a different volume and weight than drywall and finish work, and any digging on an active site needs a call to New York 811 first — see our New York 811 guide and the FAQ below for the full call-before-you-dig process.
Who runs construction accounts with us
General contractors on new-build homes and apartment buildings, remodelers gutting and rebuilding existing houses and co-ops, framing and roofing subs, and crews working commercial and multi-family buildouts across Queens all use this service. Some accounts are a single container for a defined scope; others are a rotating supply across a larger development, with containers cycling as each unit hits framing, drywall and trim.
Gut renovations inside older buildings — converting a former industrial loft space, or reworking an apartment inside a prewar building — have become a steady source of construction accounts alongside the new-build work we've always run. Both ends of that scale run on the same phase-by-phase sizing approach.
How jobsite delivery, permits and swap-outs work
Before any container gets set near an open trench, foundation excavation or utility line on an active site, we tell every jobsite account the same thing: call 811 first. New York 811 is the official call-before-you-dig notification center covering all five New York City boroughs, including Queens, plus Nassau and Suffolk counties, reached by dialing 811 or through newyork-811.com. It's free, it's required before excavation, and it's the single easiest way to avoid hitting a buried gas, electric or water line while a container or excavator is on site — see our New York 811 guide for the full process.
Separately, if the container needs to sit on the street or sidewalk rather than the job's own lot, New York City generally requires a temporary permit, issued through NYC311 (service code KA-02700). The relevant permit type is usually the Construction Debris Container Permit, which can run up to 90 days — obtained through a registered carting company or contractor rather than directly by a homeowner in most cases. See our NYC DOT permit guide before delivery. For active builds, we can also run a swap schedule — a full container picked up and an empty one dropped the same visit — so the site never sits with a box too full to use.
What loads into a construction container
Framing lumber and cutoffs, drywall, siding, roofing scraps, packaging, insulation, trim and general job debris all load together in a standard construction container. Wooden pallets are generally allowed in construction and demolition loads.
Concrete, block, brick, dirt and asphalt don't belong in a general debris container — they're dense enough to blow past a reasonable weight allowance in a fraction of the volume. Talk to us before delivery if a phase of your job is mostly heavy material and we'll plan the container differently.
Which size suits the job
Framing-phase debris on a small remodel often fits a 15 yard. Most active new-construction and larger remodel jobs run on a 20 yard or 30 yard for the bulk of the build. Full teardown-and-rebuild projects or larger commercial builds often need the 40 yard. For real examples from past jobs, see our project size guide, or call with your framing square footage and phase and we'll size it accurately.
Sizes
Which container for construction dumpster rental?
Every service runs in all five sizes. Match the material to the weight allowance and the rest takes care of itself.
| Size | Dimensions | Capacity | Weight included | Best for |
|---|---|---|---|---|
| 10 Yard Dumpster | 12 ft long × 8 ft wide × 3.5 ft high | about 3 pickup truck loads | 1–2 tons | Small apartment cleanouts, single-room gut jobs, concrete and heavy debris, roofing up to about 15 squares. |
| 15 Yard Dumpster | 16 ft long × 8 ft wide × 4 ft high | about 4–5 pickup truck loads | 2–3 tons | Basement and storefront cleanouts, kitchen remodels, medium roof tear-offs, small deck removals. |
| 20 Yard Dumpster | 22 ft long × 7.5 ft wide × 4.5 ft high | about 6 pickup truck loads | 3–4 tons | Multi-family cleanouts, flooring and siding jobs, large tear-offs, drywall and mud phases. |
| 30 Yard Dumpster | 22 ft long × 8 ft wide × 6 ft high | about 9 pickup truck loads | 4–5 tons | Full gut renovations, new construction, estate clearances, commercial fit-outs and demolition. |
| 40 Yard Dumpster | 22 ft long × 8 ft wide × 8 ft high | about 12 pickup truck loads | 5–6 tons | Large commercial fit-outs, industrial clear-outs, major renovations and high-volume light debris. |
Talk to a real person
Need construction dumpster rental in Long Island City?
Call (929) 205-3306 and describe the job. You will get a flat price and a delivery time on the same call — most orders called in early go out the same day.
Mon–Sat 7:00am – 7:00pm
Answers
Construction Dumpster Rental — your questions
Do I need to call 811 before a container is delivered to a jobsite?
If the container is only being set on a driveway or paved surface, generally no. But if any digging, trenching or excavation is happening on the same site, New York law requires calling New York 811 (dial 811 or newyork-811.com) before excavation so underground utilities can be marked. It's free and it covers Queens along with the rest of New York City.
Do I need a DOT permit to place a container in the street on a jobsite?
In most cases yes — New York City issues a Construction Debris Container Permit through NYC311 (service code KA-02700) for street or sidewalk placement, generally obtained through a registered carting company or contractor. See our <a href='/blog/nyc-dot-dumpster-permit-guide.html'>NYC DOT permit guide</a>.
Can you set up a swap schedule for an active build?
Yes — for ongoing jobs we run scheduled swaps so a full container is picked up and an empty one dropped in the same visit, timed to your framing, drywall and trim phases.
Do wooden pallets and packaging go in the same container as framing scraps?
Yes — construction and demolition loads generally allow wooden pallets even where general household waste wouldn't. Packaging and framing cutoffs load together without issue.
What happens if concrete or brick ends up mixed into a construction load?
A small amount usually isn't a problem, but a load that's mostly concrete or masonry will run over a reasonable weight allowance fast since those materials are so dense. If you know a phase will generate heavy debris, tell us ahead of time and we'll plan for it.
Can the container stay on an active jobsite for weeks or months?
Yes — long-running rentals with scheduled swaps are common on multi-month builds across Queens. A Construction Debris Container Permit can run up to 90 days when street placement is involved; we'll help you plan around that timeline when you call.
Service area
Construction Dumpster Rental across New York City
We run dumpsters out of our 4301 39th St yard across every corner of Long Island City and out into Queens. If your neighborhood is not on this list, call us anyway. We probably still get there.